Air Dryer

A centrifugal blower and high efficiency heater eliminates the use of valuable compressed air to be used for desiccant regeneration. The completely automatic drying system uses blower to pull ambient Air and pass it through the heater. This hot Air stream flows opposite to drying flow direction. Hot Air above 200 C regenerates the moisture inside desiccant bed and strips it completely of all moisture. The advanced control system monitors the dew point and adjusts the heating / regeneration accordingly thereby providing valuable energy savings.

  • Dew point monitoring and control
  • Display Alarms
  • Computer control
  • Display status
  • Display Pressure
  • Pressure monitoring Alarm
  • High P- Remote Start/Stop
  • Low Pressure Alarm
  • Min. ressure switches and alarm
  • Externally heated or heatless dryer functions integrated to the TMP HKBP dryer
     
TMP-HKBP SERIES DESICCANT AIR DRYER ( HEATED )
Model Capacity
(m3/dk)
Maks. Working Pressure
(bar)
ConnectionSize (inch) Voltage Pressure Drop
(mbar)
Dew Point
(°C)
Maks. Inlet Temp.
(°C)
Package Power
(kw)
Filter Set
TMP-HKBP 850 14,2 10 2" 380/3 <130 -40 50

8,75

 

-

TMP-HKBP 1000 16,2 10 2" 380/3 <130 -40 50 8,75 -
TMP-HKBP 1250 20,8 10 DN 80 380/3 <130 -40 50 10,25 -
TMP-HKBP 1250 20,8 10 DN 80 380/3 <130 -40 50 10,25 -
TMP-HKBP 1500 25 10 DN 80 380/3 <130 -40 50 10,25 -
TMP-HKBP 1800 30 10 DN 80 380/3 <130 -40 50 11,75 -
TMP-HKBP 2200 36,6 10 DN 80 380/3 <130 -40 50 14,75 -
TMP-HKBP 2700 45 10 DN 80 380/3 <130 -40 50 17 -
TMP-HKBP 3200 53,3 10 DN 100 380/3 <130 -40 50 17 -
TMP-HKBP 3600 60 10 DN 100 380/3 <130 -40 50 26,4 -
TMP-HKBP 4400 73,3 10 DN 100 380/3 <130 -40 50 26,4 -
TMP-HKBP 5000 83,3 10 DN 125 380/3 <130 -40 50 48,25 -
TMP-HKBP 6300 105 10 DN 150 380/3 <130 -40 50 43,25 -
TMP-HKBP 7200 120 10 DN 150 380/3 <130 -40 50 47 -
TMP-HKBP 8800 146,6 10 DN 150 380/3 <130 -40 50 47 -
TMP-HKBP 10800 180 10 DN 200 380/3 <130 -40 50 69,50 -